Electronic parturition bed

(Main Usage & Structure)Main Usage: Electric operating table can be operated for clinical use.
　b) Structure :Operating table consists of two parts: mechanical and electro-hydraulic control system. Depending on manual operation, the product can meet the requirement of posture in clinical operation.
二、Specifications
Dimension of table top：
　　Overall Length……………………………………………………………………2100mm
　　Width………………………………………………………………………………500mm
Dimension of section：
Head Section………………………………………………………………250×500mm
Back Section………………………………………………………………545×500mm
Seat section……………………………………………………………450×500mm
Leg Section………………………………………………………………600×240mm
Kidney Bridge…………………………………………………………75×500mm
Foot Section……………………………………………………………180×273mm
Table top of from floor
Min Height………………………………………………………750mm
Max Height…………………………………………………………1000mm
Adujst…………………………………………………………………………250mm
Range of movements：
Reversed Trendelenburg……………………………………………………………≥20°
Trendelenburg…………………………………………………………≥15°
Lateral Tilt………………………………………………………………≥15°
Backward and Forward Movements………………………………………≥400mm
Adjustment of sections：
Head Section Raised  from the horizontal……………………………………≥45°
Head Section lowered from the horizonta……………………………………≥90°
Back Section Raised from the horizontal…………………………………≥45°
Kidney Bridge Elevated………………………………………………………≥80mm
Leg Section Lowered from the horizontal………………………………≥90°
Leg section opened…………………………………≥90°
safe working load……………………………………………………135kg
Lifting speed…………………………………………………………4～16mm/s
Foot and leg board board into a horizontal or vertical.
Device safety sort  I     B
IPX4   Ingress Protection：IPX4    
AC）220V，50Hz    Power：（AC）220V，50Hz
（DC）24V  Internal electric source:（DC）24V
　　Battery capacity ≥ 2.4AH
三、Structure
　　Electric Operating Table is made up of the table top, the main part, the electric controlling part and the accessories, etc. It’s raising, lowering, lateral tilt, trendelenburg and reversed trendelenburg,backward and forward movements are all drived by the motors.
　　　。The table top is made up of head section, back section, seat section, leg section, foot section and kidney bridge. The head section and the foot section can all be disassembled. The head section and back section can be raised or lowered from the horizontal. The kidney bridge can be adjusted up and down.The leg section can be lowered from the horizontal and opened. The table top can be move backward and forward on the main if necessary. The table top is made of engineering plastics, thus X-ray examination of can be carried out on it.
　　The main part includes rotary frame, lateral tilt arrangements, trendelenburg and reversed trendelenburg arrangements, ascending and descending arrangements and the base. The lateral tilt arrangements, trendelenburg and reversed trendelenburg arrangements can drive the rotary frams to carry out the lateral tilt, trendelenburg and reversed trendelenburg movements. Moving system can drive the operating table Backward and Forward movements. Ascending and descending arrangements can drive the operating table to ascend or descend.
　　　
　　The electric controlling part is made up of steady power supple, controlling push button container. The power supply of the operating table is :connect with alternating current (220V AC), then change it into direct current (24V DC) to drive the motor starter to word.
　　Electric operating table mattresses are produced by the high-density sponge covered leatherette materials or overall bubble forming, with antistatic properties.
　　This product is equipped with emergency power supply, and emergency power is lead-acid battery which you can automatically charge, When net power is off , the emergency power source can automatically jump to working condition. Emergency power has charging light. When the green light is bright, it means it is charging. After the power is sufficient, light turns off.